供應ABS移印油墨

    油墨特性： 擁有和德國彩麗寶一樣的顏色,主要用于PP,PE,BOPP等材料上,具有高色澤,高色彩,高遮蓋力,高穩定性,耐酒精及耐磨擦之特點。 印刷：絲印移印均可。 表干及實干時間：表干時間自然揮發5-10分鐘；實干時間在24小時以內。 稀釋及清洗：SV3慢干開油水,UVK1（移印開油水）同時可使用718洗網水清洗。 測試方法（完全干燥后）： 1,3m膠紙粘在畫有百格的油墨表面,45度角迅速拉起不脫油; 2,純度99%的工業酒精,一千克砝碼用棉布包住在油墨表面,以水平力來回拉200次無脫色; 3, 耐磨：橡皮擦500g力水平來回擦500次。 使用方法： 1,使用前應充分?jǐn)嚢?用后隨時封閉； 2,攪拌時加開油水10-15%,稀釋到印刷粘度； 3,網板塞網時可用洗網水清洗； 4,不得與其它類型油墨混合使用。 注意事項： 1,塑膠材料的外觀相似,但可能會是不同的材料,客戶需試印確定其符合要求后,再批量印刷； 2,在移印過程中,如出現拉絲或散開,可適當加入一些慢干膏即可; 3,環境溫度過高,將會影響油墨原有質量； 4,根據氣候變化,請遠離火源,陰暗環境下存放。 The characteristics of ink:Have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, high alcohol and wear resistance, high stability.Printing: silk screen printing can be.Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water ) can be simultaneously used 718 washing network water cleaning.Test method ( completely dry):1, 3M gummed paper with ink surface adhesion in the painting, the 45 degree angle quickly pulled off the oil;2, purity 99% of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, the horizontal force and pull 200 times without decolorization;3, wear resistance: the eraser 500g force level wipe 500 times back and forth.Method of use:1, before the use should be fully mixing, use at any time after the closure;2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;3, mesh plug mesh can be used when washing network water cleaning;4, shall not be mixed with other types of ink.Matters needing attention:1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing;2, in the printing process, such as drawing or spread out, may be appropriate to add some cream to slow drying;3, the ambient temperature is too high, it will affect the quality of the original ink;4, according to the climate change, please stay away from fire, stored in a dark environment.